APLIKASI UNFINISHED MANIPULATING FABRIC PADA BUSANA READY TO WEAR DELUXE DENGAN SUMBER IDE PASIR BERBISIK

Authors

  • Herliendyah Nurrohmah Program Studi S1 Pendidikan Tata Busana, Fakultas Teknik, Universitas Negeri Surabaya
  • Peppy Mayasari Program Studi S1 Pendidikan Tata Busana, Fakultas Teknik, Universitas Negeri Surabaya
  • Ma’rifatun Nashikhah Program Studi S1 Pendidikan Tata Busana, Fakultas Teknik, Universitas Negeri Surabaya
  • Mein Kharnolis Program Studi S1 Pendidikan Tata Busana, Fakultas Teknik, Universitas Negeri Surabaya

DOI:

https://doi.org/10.63864/jsa.v11i1.392

Keywords:

application, Unfinished Manipulating Fabric, ready to wear deluxe, pasir berbisik

Abstract

This study focuses on applying unfinished fabric manipulation techniques to deluxe ready-to-wear clothing inspired by the whispering sands of Bromo. The objectives are to formulate the manufacturing process, achieve the desired results, and present the clothing designs. Whispering sand was selected as the source of inspiration due to its distinctive characteristics, namely the formation of sand waves caused by gusts of wind that make the sand fly and create beautiful, unique waves. These waves were applied to the garments using thick denim fabric to create a rough texture resembling sand. This creation process employs a practice-led research approach consisting of pre-design, design, realization, and presentation of the work. The resulting designs include three deluxe, ready-to-wear garments: one men's three-piece set consisting of a shirt, outerwear, and pants, and two women's two-piece sets. The first women's garment includes outerwear and a skirt. The second women's garment features outerwear and a jumpsuit.

References

Anggriyana, S. (2016). Baca artikel detikTravel, "Begini Asal Muasal Populernya Nama Pasir Berbisik di Bromo". Diakses dari https://travel.detik.com/domestic-destination/d-3258081/begini-asal-muasal-populernya-nama-pasir-berbisik-di-bromo

Ashila, A. Z. (2023). Modifikasi Busana Ready-To-Wear Deluxe Pada Era 1950-An Dengan Teknik Applique Dan Ruffles.

Burns, Angela. (2021). Rethinking Fabric: The Application of Fabric Manipulation Techniques in Fashion Design Education. International Journal of Art & Design Education. 41. 10.1111/jade.12375.

Dewi, N. M. A. K., & Wulansari, V. (2023). Style Fashion Ready To Wear Deluxe Terinspirasi Dari Gambar Penderita Depresi: (Studi Kasus : Penerapan Motif Pada Busana). Jurnal Fashionista, 1(1), 29–39. Retrieved from https://jurnal.idbbali.ac.id/index.php/fashionista/article/view/639

Hendriyana, H. (2021). Metodologi Penelitian Penciptaan Karya: Practice-Led Research and Practice-Based Research Seni Rupa, Kriya, Dan Desain - Edisi Revisi. Yogyakarta: Andi.

Kusuma, K. S., Nahari, I., Kharnolis, M., & Arifiana, D. (2024). Creation of Ready to Wear Deluxe with Manipulating Fabric Slashing Inspired by the Golden Sunrise of Bromo. Jurnal Riset Multidisiplin Dan Inovasi Teknologi, 2(03), 635–650. https://doi.org/10.59653/jimat.v2i03.1071

Khairin, A., & Ramadhan, M. S. (2021). Pengaplikasian Teknik Block Printing Pada Media Kain Alat Tenun Bukan Mesin (Atbm). ATRAT: Jurnal Seni Rupa, 8(3). https://doi.org/10.26742/atrat.v8i3.1608

Nisaa’, Ilmania & Angge, Indah Chrysanti (2023). Eksplorasi Manipulasi Kain Sebagai Karya Seni Rupa. Sakala Jurnal Seni Rupa Murni, 4(2), 89–100. Retrieved from https://ejournal.unesa.ac.id/index.php/sakala/article/view/54740

Parung, C. A. P., Suwasnita, D. A. S. D., & Juniati, N. (2023). Penerapan Textile Manipulation Fabric Twisting Pada Koleksi Inspirasi Kisah Ramayana Rama dan Sinta Citywear Autumn/Winter 2023/2024. CALYPTRA, 12(1).

Sari, A. D. J., Rahayu, S. E. P., & Hidayati, N. (2023). Penciptaan Busana Ready To Wear Deluxe Terinspirasi dari Geometri pada Matematika. BAJU: Journal of Fashion and Textile Design Unesa, 4(2), 181–189. https://doi.org/10.26740/baju.v4n2.p181-189

Soehartono, S., Enrico, E., & Githapradana, D. M. W. (2025). Perancangan Busana Ready-To-Wear Deluxe Wanita Dengan Konsep Kesetaraan Gender Menggunakan Surface Design Embroidery. MODA, 7(1), 36–47. https://doi.org/10.37715/moda.v7i1.5691

Tasrif, F. A., & Arumsari, A. (2019). Pengolahan Secondhand Denim Dengan Teknik Surface Textile Design Yang Terinspirasi Dari Keindahan Alam Pulau Mandeh. eProceedings of Art & Design, 6(2)

Teowarang, J. (2019). Perancangan Ready To Wear Deluxe Berkonsep Sustainable Fashion Untuk Brand Allegra Jane. MODA, 1(2), 154–163. https://doi.org/10.37715/moda.v1i2.884

Tourdejava.net. (2018). 7 Objek Wisata Ini Wajib Hukumnya Dikunjungi Agar Wisata di Gunung Bromo Meninggalkan Kesan. Diakses dari https://www.tourdejava.net/2018/10/objek-wisata-bromo-tengger-semeru.html

Downloads

Published

2025-06-20

How to Cite

Nurrohmah, H., Mayasari, P., Nashikhah, M., & Kharnolis, M. (2025). APLIKASI UNFINISHED MANIPULATING FABRIC PADA BUSANA READY TO WEAR DELUXE DENGAN SUMBER IDE PASIR BERBISIK. Jurnal Socia Akademika, 11(1), 102–112. https://doi.org/10.63864/jsa.v11i1.392

Issue

Vol. 11 No. 1 (2025): Edisi Juni 2025

Section

Articles

License

Copyright (c) 2025 Jurnal Socia Akademika

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Copyright Notice

 

Retained Rights/Terms and Conditions of Publication

 

1. As an author you (or your employer or institution) may do the following:

  • make copies (print or electronic) of the article for your own personal use, including for your own classroom teaching use;
  • make copies and distribute such copies (including through e-mail) of the article to research colleagues, for the personal use by such colleagues (but not commercially or systematically, e.g. via an e-mail list or list server);
  • present the article at a meeting or conference and to distribute copies of the article to the delegates attending such meeting;
  • for your employer, if the article is a ‘work for hire’, made within the scope of your employment, your employer may use all or part of the information in the article for other intra-company use (e.g. training);
  • retain patent and trademark rights and rights to any process, procedure, or article of manufacture described in the article;
  • include the article in full or in part in a thesis or dissertation (provided that this is not to be published commercially);
  • use the article or any part thereof in a printed compilation of your works, such as collected writings or lecture notes (subsequent to publication of the article in the journal); and prepare other derivative works, to extend the article into book-length form, or to otherwise re-use portions or excerpts in other works, with full acknowledgement of its original publication in the journal;
  • may reproduce or authorize others to reproduce the article, material extracted from the article, or derivative works for the author’s personal use or for company use, provided that the source and the copyright notice are indicated, the copies are not used in any way that implies RCEPM-LIPI endorsement of a product or service of any employer, and the copies themselves are not offered for sale.

All copies, print or electronic, or other use of the paper or article must include the appropriate bibliographic citation for the article’s publication in the journal.

 

2. Requests from third parties

Although authors are permitted to re-use all or portions of the article in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use. Requests for all uses not included above, including the authorization of third parties to reproduce or otherwise use all or part of the article (including figures and tables), should be referred to RCEPM-LIPI by going to our website athttp://telimek.lipi.go.id.

 

3. Author Online Use

  • Personal Servers. Authors and/or their employers shall have the right to post the accepted version of articles pre-print version of the article, or revised personal version of the final text of the article (to reflect changes made in the peer review and editing process) on their own personal servers or the servers of their institutions or employers without permission from RCEPM-LIPI, provided that the posted version includes a prominently displayed RCEPM-LIPI copyright notice and, when published, a full citation to the original publication, including a link to the article abstract in the journal homepage. Authors shall not post the final, published versions of their papers;
  • Classroom or Internal Training Use. An author is expressly permitted to post any portion of the accepted version of his/her own articles on the author’s personal web site or the servers of the author’s institution or company in connection with the author’s teaching, training, or work responsibilities, provided that the appropriate copyright, credit, and reuse notices appear prominently with the posted material. Examples of permitted uses are lecture materials, course packs, e-reserves, conference presentations, or in-house training courses;
  • Electronic Preprints. Before submitting an article to an MEV Journal, authors frequently post their manuscripts to their own web site, their employer’s site, or to another server that invites constructive comment from colleagues. Upon submission of an article to MEV Journal, an author is required to transfer copyright in the article to RCEPM-LIPI, and the author must update any previously posted version of the article with a prominently displayed RCEPM-LIPI copyright notice. Upon publication of an article by the RCEPM-LIPI, the author must replace any previously posted electronic versions of the article with either (1) the full citation to the work with a Digital Object Identifier (DOI) or link to the article abstract in MEV journal homepage, or (2) the accepted version only (not the final, published version), including the RCEPM-LIPI copyright notice and full citation, with a link to the final, published article in journal homepage.

 

4. Articles in Press (AiP) service

RCEPM-LIPI may choose to publish an abstract or portions of the paper before we publish it in the journal. Please contact our Production department immediately if you do not want us to make any such prior publication for any reason, including disclosure of a patentable invention.

 

5. Author/Employer Rights

If you are employed and prepared the article on a subject within the scope of your employment, the copyright in the article belongs to your employer as a work-for-hire. In that case, RCEPM-LIPI assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.

 

6. RCEPM-LIPI Copyright Ownership

It is the formal policy of RCEPM-LIPI to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of the RCEPM-LIPI, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others. RCEPM-LIPI distributes its technical publications throughout the world and does so by various means such as hard copy, microfiche, microfilm, and electronic media. It also abstracts and may translate its publications, and articles contained therein, for inclusion in various compendiums, collective works, databases and similar publications

 

Every accepted manuscript should be accompanied by "Copyright Transfer Agreement" prior to the article publication.