PERBEDAAN HASIL MENGHIAS KUKU (NAIL ART) 3 DIMENSI BENTUK BUNGA MENGGUNAKAN ACRYLIC POWDER DENGAN CARVING GEL

Authors

  • Fauziah Ariani Program Studi Kosmetik dan Kecantikan, Fakultas Teknik, Universitas Negeri Jakarta
  • Mari Okatini Program Studi Kosmetik dan Perawatan Kecantikan, Fakultas Teknik, Universitas Negeri Jakarta
  • Dwi Atmanto Program Studi Kosmetik dan Perawatan Kecantikan, Fakultas Teknik, Universitas Negeri Jakarta

Keywords:

3D nail art, acrylic powder, carving gel

Abstract

This objective of study to find out the difference between the three-dimensional nail art result between the use of acrylic powder and carving gel. This type of research is quantitative descriptive with experimental methods. The population used in this study was active students of the 2020 Army Cosmetics and Beauty Studies Program, Jakarta State University who had no disease or nail abnormalities. Sampling techniques using purposive sampling. The method of data collection in this study is an observation method, carried out with instruments in the form of a sheet of criteria of evaluation in the shape of an eclipse. The study uses indicators of evaluation such as texture, design suitability, versatility, and preference level. The panellists in this study were three people. Data analysis techniques using normality test, homogenity test and t-test based on the results of the hypothesis showed that there was a difference in nail art results between using acrylic powder and carving gel. This is demonstrated by the calculations obtained by thitung > ttable is 3,214 > 2,306, then Ho rejected at the level of significance 0,05.

References

Agustin, E. W., Ihsani, A. N. N., Putri, N. S., Amelita, A. R., Victoriana, G., & Mayasari, L. E. (2024). Unnes Prigel Analysis Study: Application Of Nail Art Design Techniques In Liekuang & Co Mini Salon Project. Atlantis Press, 107–112. Https://Doi.Org/10.2991/978-2-38476-198-2_13
Ariesta, P. S. (2016). Pengaruh Suhu Air Terhadap Hasil Jadi Water Marble Nail Art. E-Journal Unesa, 05(1), 1–9.
Hidayah, N., & Okatini, M. (2014). Peranan Kreativitas Terhadap Hasil Belajar Nail Art. Jurnal Tata Rias, 03(1).
Karakhati, N. (2010). 10 Teknik & 20 Kreasi Nail Extension Seni Menghias Kuku. Gramedia Pustaka Utama.
Rodriguez, A. (2024, April 6). Flora Nail Art Is Very Trendy And Here Are 10 Inspirational Flower Designs. Thursd. (diakses pada 18 April 2024) Https://Thursd.Com/Articles/Floral-Nail-Art-Inspiration
Rohmawati, H. C., & Pambudi, I. P. (2023). Peranan Kreativitas Terhadap Hasil Belajar Nail Art Tiga Dimensi Pada Mahasiswa Program Studi Tata Rias Aks-Akk Yogyakarta. Jurnal Socia Akademika, 9(1).
Sepriani, N. (2023). Perbandingan Penggunaan Kuku Exstention Nail Tip Dan Poly Gel Pada Hasil Jadi Nail Art Dengan Tema Marble. Jurnal Pendidikan Tambusai, 7(3). Https://Doi.Org/10.31004/Jptam.V7i3.10943
Wasilah. (2020). Studi Perbandingan Hasil Teknik Ombre Nail Art Dengan Sponge Dan Air Brush. Beauty And Beauty Health Education Journal, 9(1), 23. Https://Journal.Unnes.Ac.Id/Sju/Index.Php/Bbhe

Downloads

Published

2024-12-20

How to Cite

Ariani, F., Okatini, M., & Atmanto, D. (2024). PERBEDAAN HASIL MENGHIAS KUKU (NAIL ART) 3 DIMENSI BENTUK BUNGA MENGGUNAKAN ACRYLIC POWDER DENGAN CARVING GEL. Jurnal Socia Akademika, 10(2), 67–72. Retrieved from https://aks-akk.e-journal.id/jsa/article/view/315

Issue

Vol. 10 No. 2 (2024): Edisi Desember 2024 (on going)

Section

Articles

License

Copyright Notice

 

Retained Rights/Terms and Conditions of Publication

 

1. As an author you (or your employer or institution) may do the following:

  • make copies (print or electronic) of the article for your own personal use, including for your own classroom teaching use;
  • make copies and distribute such copies (including through e-mail) of the article to research colleagues, for the personal use by such colleagues (but not commercially or systematically, e.g. via an e-mail list or list server);
  • present the article at a meeting or conference and to distribute copies of the article to the delegates attending such meeting;
  • for your employer, if the article is a ‘work for hire’, made within the scope of your employment, your employer may use all or part of the information in the article for other intra-company use (e.g. training);
  • retain patent and trademark rights and rights to any process, procedure, or article of manufacture described in the article;
  • include the article in full or in part in a thesis or dissertation (provided that this is not to be published commercially);
  • use the article or any part thereof in a printed compilation of your works, such as collected writings or lecture notes (subsequent to publication of the article in the journal); and prepare other derivative works, to extend the article into book-length form, or to otherwise re-use portions or excerpts in other works, with full acknowledgement of its original publication in the journal;
  • may reproduce or authorize others to reproduce the article, material extracted from the article, or derivative works for the author’s personal use or for company use, provided that the source and the copyright notice are indicated, the copies are not used in any way that implies RCEPM-LIPI endorsement of a product or service of any employer, and the copies themselves are not offered for sale.

All copies, print or electronic, or other use of the paper or article must include the appropriate bibliographic citation for the article’s publication in the journal.

 

2. Requests from third parties

Although authors are permitted to re-use all or portions of the article in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use. Requests for all uses not included above, including the authorization of third parties to reproduce or otherwise use all or part of the article (including figures and tables), should be referred to RCEPM-LIPI by going to our website athttp://telimek.lipi.go.id.

 

3. Author Online Use

  • Personal Servers. Authors and/or their employers shall have the right to post the accepted version of articles pre-print version of the article, or revised personal version of the final text of the article (to reflect changes made in the peer review and editing process) on their own personal servers or the servers of their institutions or employers without permission from RCEPM-LIPI, provided that the posted version includes a prominently displayed RCEPM-LIPI copyright notice and, when published, a full citation to the original publication, including a link to the article abstract in the journal homepage. Authors shall not post the final, published versions of their papers;
  • Classroom or Internal Training Use. An author is expressly permitted to post any portion of the accepted version of his/her own articles on the author’s personal web site or the servers of the author’s institution or company in connection with the author’s teaching, training, or work responsibilities, provided that the appropriate copyright, credit, and reuse notices appear prominently with the posted material. Examples of permitted uses are lecture materials, course packs, e-reserves, conference presentations, or in-house training courses;
  • Electronic Preprints. Before submitting an article to an MEV Journal, authors frequently post their manuscripts to their own web site, their employer’s site, or to another server that invites constructive comment from colleagues. Upon submission of an article to MEV Journal, an author is required to transfer copyright in the article to RCEPM-LIPI, and the author must update any previously posted version of the article with a prominently displayed RCEPM-LIPI copyright notice. Upon publication of an article by the RCEPM-LIPI, the author must replace any previously posted electronic versions of the article with either (1) the full citation to the work with a Digital Object Identifier (DOI) or link to the article abstract in MEV journal homepage, or (2) the accepted version only (not the final, published version), including the RCEPM-LIPI copyright notice and full citation, with a link to the final, published article in journal homepage.

 

4. Articles in Press (AiP) service

RCEPM-LIPI may choose to publish an abstract or portions of the paper before we publish it in the journal. Please contact our Production department immediately if you do not want us to make any such prior publication for any reason, including disclosure of a patentable invention.

 

5. Author/Employer Rights

If you are employed and prepared the article on a subject within the scope of your employment, the copyright in the article belongs to your employer as a work-for-hire. In that case, RCEPM-LIPI assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.

 

6. RCEPM-LIPI Copyright Ownership

It is the formal policy of RCEPM-LIPI to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of the RCEPM-LIPI, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others. RCEPM-LIPI distributes its technical publications throughout the world and does so by various means such as hard copy, microfiche, microfilm, and electronic media. It also abstracts and may translate its publications, and articles contained therein, for inclusion in various compendiums, collective works, databases and similar publications

 

Every accepted manuscript should be accompanied by "Copyright Transfer Agreement" prior to the article publication.